Home > Compaq Smart > Compaq Smart Array Controllers Driver For Windows 2000

Compaq Smart Array Controllers Driver For Windows 2000

For CSP version 5.04A, the bundle information file is named BP000013.TXT.Installation Procedure:Installing the Compaq Smart Array Controllers Non-Miniport Drivers is a two step process. A12. A13. The controller device driver must be installed first, followed by the disk device driver. http://fallbrookpcusersgroup.org/compaq-smart/compaq-smart-array-431-driver.html

Does the Smart Array 5i support Single Ended SCSI devices? 12. This reduces the risk of flashing firmware to the controller. Performance Compaq’s High Performance Architecture sets new boundaries of industry performance expectations! Service and Support, CarePaq and Warranty Information Available Software Product Services Standalone telephone support Rights to new license version Media and documentation updates Available Hardware Product Services Installation services http://h20564.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=377227

RAID ADG requires a minimum of 64-MB battery-backed cache. Notes:Unsupported Features:The drivers must not be installed on the boot controller.The drivers are currently not supported by any of the Compaq management utilities such as Compaq Insight Manager or the Compaq SCSI Port Connectors One external and one internal SCSI port Data Transfer Method 64-Bit PCI bus-master PCI Bus Speed 64-bit, 66-MHz PCI (533 MB/s maximum bandwidth) PCI 3.3 volt CPI slot Once reported, our staff will be notified and the comment will be reviewed.

Novell is a registered trademark or trademark of Novell, Inc., in the U.S. and/or other countries. The SA-532 provides the best performance and capacity for RAID array controllers in entry-level and workgroup Compaq ProLiant servers or in any ProLiant server where hardware RAID is needed at an The information is provided "as is" without warranty of any kind and is subject to change without notice.

and/or other countries. Environment Tracking for External Storage System monitors Fault Tolerance Keeps data available and server running while a failed drive is being replaced; several fault tolerance configurations are supported including: It allocates two sets of parity data across drives and allows simultaneous write operations. http://h20564.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=377836 If you have an active Support Agreement or HPE packaged support, you can link them to your profile to ensure access to all services.

Environment Tracking for External Storage System: Monitors fan speed and cabinet temperature of ProLiant Storage System and newer Compaq storage enclosures. Fault Tolerance Keeps data available and server running while The SA-532 is not supported in 5-volt PCI slots. A9. Thank You for Submitting an Update to Your Review, !

Key Features Advanced Data Guarding (RAID ADG) offers breakthrough level of fault protection of RAID volumes up to 2 TB and a total of 56 disk drive in a RAID volume. http://download.cnet.com/SP29030-EXE/3000-2112_4-119619.html A11. Ease of Use Consistency and Upgradability make the Smart Array family unique in the industry: GUI based configuration, management and diagnostic software tools Common data formatting between generations of products Data Dynamic Sector Repairing continually performs background surface scans on the hard disk drives during inactive periods and automatically remaps bad sectors, ensuring data integrity.

A5. weblink A18. Compaq, the Compaq logo, Insight Manager, ProLiant, SANworks, StorageWorks and SmartStart are trademarks of Compaq Information Technologies Group, L.P. and/or other countries.

It is recommended for up to 14 hard drives. What is the difference between the Smart Array 5i and the Smart Array 5i Plus? This higher level of protection is ideal to protect large logical volumes and with high capacity disk drives where a failed drive rebuild time may be significant. Note: RAID ADG navigate here Utilizing both SCSI channels (1 internal and 1 external) of the SA-532 allows you to configure up to 28 hard drives to store up to 2TB of storage per PCI slot.

Nothing herein should be construed as constituting an additional warranty.  DA-10640 - U.S. - Version 17 - June 25, 2002 QuickSpecsCompaq Smart Array 532 Controller

Models Smart Array 532 Controller 225338-B21 All Compaq Ultra2 and Ultra3 controllers are data compatible with Ultra2 and Ultra3 hard drives and servers. Product Highlights Data Compatibility Data compatibility among all models of Smart Array Controllers means customers can instantly upgrade their Smart Array products to get to higher performance, capacity and availability.

in the U.S.

Very helpful Somewhat helpful Not helpful Type: Driver - Storage Controller Version: 5.01 (A)(19 Dec 2000) Operating System(s): Microsoft Windows 2000 Description The Compaq Smart Array Controllers Non-Miniport Drivers are an in the U.S. Please submit your review for SP29030.EXE 1. A4.

All other product names mentioned herein may be trademarks of their respective companies. A list of the individual component packages and their associated file names can be found in the Support Paq's bundle information file (BPxxxxxx.TXT). Compaq Insight Manager Powerful server and server options/storage manager tool Monitors over 1200 server parameters Configuration/Diagnostic Utilities Compaq Array Configuration Utility (ACU) Powerful configuration utility for all Smart Array controllers his comment is here Unlike competitive products, successive generations of Smart Array products understand the data format of other Smart Array controllers, providing investment protection for your Compaq storage solution.

If the firmware becomes corrupt, the controller will revert back to the last known version of firmware and continue operating. Q18. Are Ultra2 and Ultra3 compatible? 5. There are two modes of operation, please see the file REGISTRY.TXT for details and configuration information.Added support to provide detailed events in the Windows NT system event log.

Will the Smart Array 5i support both internal and external drives at the same time? 10. Maximum cache configuration is 256-MB of battery-backed cache. 64-bit, 66-MHz PCI interface boosts bandwidth up to a 533-MB/s total transfer rate. 64-bit memory addressing supports servers with greater than 4 GB What is the difference between non-RAID and RAID? 7. Proof of purchase may be required.

Nothing herein should be construed as constituting an additional warranty.  DA-10851 - World Wide - Version 7 - June 27, 2002 CarePaq is available for sale anytime during the warranty period for most products, but the commencement date will be the same as the Warranty Start Date (delivery date to end user The Smart Array Advantage Compaq's innovative design and integration work of the Smart Array family of products creates customer value that is unmatched in the industry. Summary: (10 characters minimum)0 of 1000 characters Submit The posting of advertisements, profanity, or personal attacks is prohibited.Click here to review our site terms of use.

Q15. Drive Mirroring (RAID 1, 1+0): This allocates half of the drive array to data and the other half to mirrored data, providing two copies of every file. Universal Hot Plug Tape Drives Internal AIT 100-GB, Hot Plug (Carbon) 249161-B21 Internal AIT 50-GB, Hot Plug (Carbon) 215487-B21 Internal AIT 35-GB, LVD Hot Plug (Carbon) 216886-B21 Internal 20/40-GB DAT, Hot CarePaq services are prepaid. For additional CarePaq (hardware & software) information, as well as orderable part numbers, please refer to the URL listed below: http://www.compaq.com/services/carepaq/index.html Options Controller Upgrade Options

Certain restrictions and exclusions apply. In addition, the SA-532 is data compatible with all Wide Ultra3 and Wide Ultra2 drives and servers, offering an unparalleled degree of investment protection. Note: 32 MB of DRAM used for code, transfer buffers, and non-battery backed read cache Online Management Features: Online Capacity Expansion, Online RAID Level Migration, Online Stripe Size Migration, Online Spares